Trubolt Installation Instructions

QuickMenu Save Document

Trubolt Wedge Anchor

Product Information Suggested/Ordering Information Performance Data Approval Listings
	INSTALLATION INSTRUCTIONS
		1. Select a carbide drill bit with a diameter equal to the anchor diameter. Drill hole to any depth exceeding the desired embedment. See chart for minimum recommended embedment
		2. Clean hole or continue drilling additional depth to accommodate drill fines.
		3. Assemble washer and nut, leaving nut flush with end of anchor to protect threads. Drive anchor through material to be fastened until washer is flush to surface of material.
		4. Expand anchor by tightening nut 3-5 turns past the hand tight position, or to the specified torque requirement.
	Download PDF of Installation Instructions for Trubolt (all diameters) Download PDF of Installation Instructions for Trubolt+ 3/8", 1/2" ,5/8"
	Trubolt Wedge Type Anchor Product Information and Suggested Specifications Selection and Order Information (2 pages) Performance Data (2 pages) : Approvals and Listing

ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370