|
Dependable
Heavy-Duty,
Inspectable
Wedge Type
Expansion
Anchor
|
Wedge
Type Anchors —
SPECIFIED FOR ANCHORAGE INTO CONCRETE
Wedge anchors feature a stainless steel
split expansion ring and a threaded stud bolt body and integral
cone expander, nut and washer. Anchor bodies are made of
plated carbon steel, hot-dipped galvanized carbon steel,
type 304 stainless steel or type 316 stainless steel as
identified in the drawings or other notations.
The exposed end of the anchor is stamped to identify anchor
length. Stampings should be preserved during installation
for any subsequent embedment verification.
Use carbide tipped hammer drill bits made in accordance
to ANSI B212.15-1994 to install anchors.
Anchors
tested to ASTM E488 criteria and listed by ICC (formerly
ICBO). Anchors are listed by the following agencies as required
by the local building code: UL, FM, City of Los Angeles,
California State Fire Marshal and Cal Trans.
|
