header

or go to the Advance Search
HOMETechnical DataApplications GuideProductsNews & PromotionsLiterature

redhead_logo.jpg (5786 bytes)
Tapcon® 
Condrive Tool Kit 

 
 
DESCRIPTION / SUGGESTED SPECIFICATIONS

Installation  
Tool Kit  

 

 

tapcon_prod1c.jpg (6145 bytes)

 

 

 

 

Condrive 1000 Installation Tool —
SPECIFIED FOR ANCHORAGE INTO CONCRETE, BRICK OR BLOCK

tapcon_prod1a.jpg (7528 bytes) The key to Tapcon's fast and easy installation is the multi-purpose Condrive Installation Tool. The drive sleeve, along with the head and phillips sockets provide the installer with the flexibility necessary for the complete variety of Tapcon applications. (does not include drill bit)

(Note: 1 matching bit is included in each box of Tapcon anchors)

tapcon_prod1b.jpg (7949 bytes)

 
ADVANTAGES
epcon_a7prod1e.jpg (309 bytes)Fast change from drilling to driving
epcon_a7prod1e.jpg (309 bytes)Eliminates need to change out chuck and bits
epcon_a7prod1e.jpg (309 bytes)Eliminates need for two tools
epcon_a7prod1e.jpg (309 bytes)Special nut driver is recessed for torque control to reduce head breakage
epcon_a7prod1e.jpg (309 bytes)Includes bits for all sizes hex and phillips head
APPLICATIONS
tapcon_prod1d.jpg (11857 bytes) The picture shows the Condrive 1000 Installation Kit in action. The kit makes for fast and easy change over from drill bit to driver and controls the driving torque to prevent thread stripping and head snapping in hard base materials.

Condrive 1000
Spare Parts

 
PART NO. DESCRIPTION QTY/WT
(A)    7901001 Drill Adapter 1/.06
(B)    7901002 Sleeve 1/.01
        7901003 Black Band 1/.02
        7901004 5/32" Ball Bearing 1/.02
(C)    7901006 3/16" Socket 1/.04
(D)    7901007 1/4" Socket 1/.05
        7901008 #2 Phillips bit for 3/16" anchor 1/.10
        7901009 #3 Phillips bit for 1/4" anchor 1/.12
(E)     7901010 Phillips Socket 1/.44
        7902006 Set Screw 1/.02
        7902008 1/16" Ball Bearing 1/.02
        7902010 1/8" Hex Key 1/.10

(Note: 1 matching bit is included in each box of Tapcon anchors. For part numbers see Tapcon Selection Chart.

 
copyright © 2008 Illinois Tool Works, Inc. Privacy Policy Terms and Conditions