header

or go to the Advance Search
QuickMenu Save Document

redhead_logo.jpg (5786 bytes)
Tapcon® 
Condrive 1000 Tool Kit and Starter Kit 

 
Tapcon Condrive Tool Kits
Advantages  |  Applications  |  Installation Guidelines  |  Parts
DESCRIPTION / SUGGESTED SPECIFICATIONS

Installation  
Tool Kit  

 

tapcon_prod1c.jpg (6145 bytes)

 

 

 

 

Condrive 1000 Installation Tool —
SPECIFIED FOR ANCHORAGE INTO CONCRETE, BRICK OR BLOCK

The key to Tapcon's fast and easy installation is the multi-purpose Condrive Installation Tool. The drive sleeve, along with the hex head and phillips sockets provide the installer with the flexibility necessary for the complete variety of Tapcon applications (tool does not include drill bit).

Condrive® 1000 - A multi-purpose tool designed for installation of Tapcon hex head and Phillips flat head anchors up to 3-3/4" long. If driving hex head Tapcon, driver will automatically disengage. The Condrive 1000 has a reusable plastic case.

Condrive Tools are designed to specifically install Tapcon Anchors and to fit standard hammer drills.
ADVANTAGES

epcon_a7prod1e.jpg (309 bytes)Fast change from drilling to driving
epcon_a7prod1e.jpg (309 bytes)Eliminates need to change out chuck and bits
epcon_a7prod1e.jpg (309 bytes)Eliminates need for two tools
epcon_a7prod1e.jpg (309 bytes)Special nut driver is recessed for torque control to reduce head breakage

 

tapcon_prod1b.jpg (7949 bytes)

Condrive 1000 Spare Parts

PART NO. DESCRIPTION QTY/WT
(A)    7901001 Drill Adapter 1/.06
(B)    7901002 Sleeve 1/.01
        7901003 Black Band 1/.02
        7901004 5/32" Ball Bearing 1/.02
(C)    7901006 3/16" Socket 1/.04
(D)    7901007 1/4" Socket 1/.05
        7901008 #2 Phillips bit for 3/16" anchor 1/.10
        7901009 #3 Phillips bit for 1/4" anchor 1/.12
(E)     7901010 Phillips Socket 1/.44
        7902006 Set Screw 1/.02
        7902008 1/16" Ball Bearing 1/.02
        7902010 1/8" Hex Key 1/.10

For part numbers see Tapcon Selection


APPLICATIONS

This picture shows the Condrive 1000 Installation tool in action. The tool makes for fast and easy change over from drill bit to driver and controls the driving torque to prevent thread stripping and head snapping in hard base materials.
tapcon_prod1d.jpg (11857 bytes)

Tapcon Starter Kit

Starter Kit
Part Number: 7904050
Kit Contains:
1 Box HW4-114 (includes 1 drill bit)
1 Box HW4-134 (includes 1 drill bit)
1 Condrive 1000

Back to the top

  
INSTALLATION GUIDELINES

Using the Condrive 1000®

PREPARATION:
1. Place drill adapter into 3/8" or 1/2" chuck of hammer drill. Tighten chuck.

2. Place correct Tapcon® drill bit in drill adapter and tighten set screw.

3. Add socket matching anchor type to end of sleeve.
DRILL:
1. Drill hole 1/4" deeper than depth of embedment. Tapcon® anchor requires a minimum embedment of 1".

DRIVE:
2. Slide Condrive® sleeve over drill bit and snap into drill adapter.

3. Insert anchor in the end of the sleeve, position fixture to be fastened, and drive the Tapcon® anchor into the predrilled hole.

Tool automatically disengages when Hex head anchor is set.

Back to the top
Tapcon Condrive Tool Kits
Advantages  |  Applications  |  Installation Guidelines  |  Parts
ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370
copyright © 2010 Illinois Tool Works, Inc.