ANCHOR
TYPE |
KEY
FEATURES |
SIZE
RANGE
(Inches) |
CORROSION
RESISTANCE |
PERFORMANCE |
HEAD
STYLES |
APPROVALS/
LISTINGS |
Trubolt+®
Seismic Wedge Anchors
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
Approvals/Listings
Suggested Specification
|
 |
 Zinc-plated
carbon steel to ASTM B633, SC1, Type III
|
Pullout strength of 4,980 lbs in 2,500 psi Cracked Concrete (1/2" diameter) |
Hex
nut
|
ICC Evaluation Service, Inc. # ESR-2427
-Category 1 performance rating
-2006 IBC and 2009 IBC compliant
-Meets ACI 318 ductility requirements
-Tested in accordance with ACI 355.2 and ICC-ES AC193
-Listed for use in seismic zones A, B, C, D, E, & F
-3/8", 1/2", 5/8" and 3/4" diameter anchors listed in ESR-2427
City of Los Angeles - #RR25867
|
2006 IBC & 2009 IBC Compliant
All seismic zone (A-F) and cracked concrete approved
Fully-threaded
Length
ID head stamped
Through-fixture
fastening |
Diameter:
3/8, 1/2 & 5/8
Length:
3 – 8-1/2
|
Trubolt®
Wedge Anchors
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
Approvals/Listings
Suggested Specification
|
 |
Zinc-plated
carbon steel to ASTM B633, SC1, Type III
Hot
dipped galvanized to ASTM A -153
Type
304 and
316 stainless steel |
Ultimate
Pullout Performance in 4000 psi Concrete up to 26,540 lbs. (1" diameter) |
Hex
nut
Tie-Wire version |
ICC Evaluation Service, Inc. # ESR-2251
- Category 1 performance rating
- 2006 IBC compliant
- Meets ACI 318 ductility requirements
- Tested in accordance with ACI 355.2 and ICC-ES AC193
- For use in seismic zones A & B
- 1/4", 3/8" & 1/2" diameter anchors listed in ESR-2251
Underwriters Laboratories
Factory Mutual
City of Los Angeles - #RR2748
California State Fire Marshall
Caltrans
Meets or exceeds U.S. Government G.S.A. Specification A-A-1923A Type 4 (formerly GSA: FF-S-325 Group II, Type 4, Class 1) |
2006 IBC Compliant
Seismic zone (A-B) approved
Fully-threaded
Length
ID head stamped
Stainless
steel clip
Through-fixture
fastening |
Diameter:
1/4 –1
Length:
1-3/4 –12 |
Large
Diameter Tapcon (LDT) and LDTX
Self-Threading Anchor
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
Approvals/Listings
Suggested Specification
|
|
Zinc-plated
carbon steel to ASTM B695 & B633
Type
410 stainless steel
Now with EnvireX coating.
Approved for use in ACQ lumber (Excessive content of copper in ACQ lumber may affect the anchor finish.
1,000 hours salt spray ASTM B117 |
Ultimate
Pullout Performance in 4,000 psi Concrete up to 23,266 lbs. (3/4" diameter)
|
Finished
bolt style
|
Florida Building Code
|
Anti-rotation
searrated washer
Extra
large hex washer head
Length
ID head stamped
Through-fixture
fastening |
LDT
with Zinc Plating
Diameter:
3/8 – 3/4
Length:
1-3/4 – 6-1/4
LDTX with EnvireX Coating
Diameter:
3/8 & 1/2
Length: 3 – 5 |
Multi-Set II®
Drop-In Anchors
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
Approvals/Listings
Suggested Specification
|
|
Zinc-plated
carbon steel to
ASTM B633, SC1, Type III
Type
18-8 and 316 stainless steel |
Ultimate
Pullout Performance in 4,000 psi Concrete up to 9,480 lbs.(3/4" diameter) |
RM:
Flanged body
RL:
Non-flanged body
Use
any bolt or threaded rod |
GSA:
A-A-55614 Type 1 (Formerly GSA: FF-S-325 Group VIII)
Underwriters
Laboratories
Factory
Mutual
City
of Los Angeles – #RR2748
California
State Fire Marshal
Caltrans |
RM:
Flanged body to keep anchor flush with surface of concrete
RL:
Non-flanged body for recessed setting
RX:
Designed for hollow core and post tension concrete
CL:
Designed for one-sided forming, accepts coil rod |
RM
– Diameter:
1/4 – 3/4
Length:
1–-3-3/16
RL – Same as
RM (above)
RX
– Diameter:
3/8 & 1/2
Length: 3/4 –1
CL – Diameter:
1/2 & 3/4
Length:
2 & 3-3/16 |
BoaTM Coil
Expansion Anchor
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
|
|
Zinc-plated
carbon steel to ASTM B633, SC1, Type III
|
Ultimate
Pullout Performance in 4,000 psi Concrete up to 38,500 lbs. (3/4" diameter)
|
Finished
bolt style
|
|
Heavy-Duty, Reusable Fastening
Easy installation
Removable
High shear strength
Replacement coil available for easy re-use |
Diameter:
1/2 – 3/4
Length:
3–-6- |
|
Prima
High Expansion
Sleeve
Anchors
Product Information
Installation Steps
Selection/Ordering Information
Performance Data
|
|
Sleeve
– S300 Pb NFA 35561
Bolt – Grade 5 1035 carbon steel
Cone – S300 Pb NFA 35561
Coating – Zinc NFE 25009, passivation NFA 91472
|
Ultimate
Pullout Performance in 4,000 psi Concrete up to 8,500 lbs. (1/2" diameter)
|
Finished
bolt style
|
|
|
Lightweight
Concrete, and Masonry Fastening
Easy installation
Removable fastening
|
Diameter:
1/4 – 1/2
Length:
2-3/8–-3-9/16
|
Dynabolt®
Masonry Sleeve Anchors
Product Information
Installation Steps
Selection/Ordering
Information
Performance Data
Approvals/Listings
Suggested Specification
|
|
Zinc-plated
carbon steel to ASTM B633, SC1, Type III
Type
304 stainless steel |
Ultimate
Pullout Performance in 4,000 psi Concrete up to 8,900 lbs. (3/4" diameter)
|
Flat
head
Hex
nut
Acorn
nut
Tie-Wire
Round
head
Threshold
flat head
|
GSA:
A-A-1922A
(Formerly GSA: FF-S-325 Group II, Type 3, Class 3)
Factory Mutual
California State Fire Marshal
|
Concrete,
block and brick
Many
choices of head styles
Through-fixture
fastening
Available
in 304 stainless steel
|
Diameter:
1/4 – 3/4
Length:
5/8–-6-1/4 |
Stud
Stud Anchors
Product Information
Installation Steps
Selection/Ordering
Information
Performance Data
Approvals/Listings
Suggested Specification
|
|
Zinc-plated
carbon steel to ASTM B633, SC1, Type III
|
Ultimate
Pullout Performance in 4,000 psi Concrete up to 7,520 lbs.
|
Hex
nut
|
GSA:
A-A-55614 Type 2 (Formerly GSA: FF-S-325 Group VIII, Type 2)
Factory Mutual
Underwriters Laboratories
California State Fire Marshal
|
Bottom
bearing
Hammer-driven
Ideal
for jacking or leveling
Easy
installation
|
Diameter:
1/4 – 3/4
Length:
1-3/4–-6-1/4
|
