Prima High Expansion Sleeve Anchor Suggested Specifications

QuickMenu Save Document

Prima High Expansion Sleeve Anchor

INSTALLATION INSTRUCTIONS

1.	Drill a hole at the dimensions indicated in the table on the previous page. Clean hole thoroughly.
2.	Insert the anchor entirely in the hole without the fixture.
3.	Position the fixture to be anchored, make the connection using the correct diameter size Red Head Bolt (only Red Head supplied bolts MUST be used with PRIMA).
4.	Tighten to the recommended torque.

ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370