header

or go to the Advance Search
QuickMenu Save Document

redhead_logo.jpg (5786 bytes)
Poly-Set ® 
Anchors  

 
Poly-Set Plug Anchor
Approvals and Listing
 
DESCRIPTION / SUGGESTED SPECIFICATIONS

The Truly  
Versatile  
Plug Anchor  

 

 

poly01a.jpg (8990 bytes)

 

 

 

 

 Plug Anchors —
SPECIFIED FOR ANCHORAGE INTO ALL BASE MATERIALS

The Poly-Set is a polyethylene expansion anchor designed for fastening into drywall, hollow block, brick and solid concrete.
ADVANTAGES

epcon_a7prod1e.jpg (309 bytes) Unique twisting action provides superior holding over standard plug anchors
epcon_a7prod1e.jpg (309 bytes)Resistant to moisture, chemicals or atmospheric conditions — can be used anywhere
epcon_a7prod1e.jpg (309 bytes)Prepackaged in kits with matching screws and carbide-tipped drill bit
epcon_a7prod1e.jpg (309 bytes)Works well in all base materials

 
 
poly01b.jpg (5046 bytes)
SELECTION CHART

Poly-Set Anchors
  
PART
NUMBER		 DRILL BIT
SIZE		 ANCHOR
LENGTH		 SCREW
SIZE		 GRIP
RANGE		 QTY/WT
PER BOX (Lbs.)		 QTY/WT PER
MASTER CTN (Lbs.)
PS-0608SP 3/16 1-1/4 #6 - 8 3/8 - 3/4 100/ 0.9 1000/ 2
PS-1012SP 9/32 1-7/16 #10 - 12 1/2 - 1 100/ 1.8 1000/ 4
 
 
poly01c.jpg (3921 bytes)
SELECTION CHART

Poly-Set Kits
  
PART
NUMBER		 DRILL BIT
SIZE		 KIT CONTAINS GRIP
RANGE		 QTY/WT
PER BOX (Lbs.)		 QTY/WT PER
MASTER CTN (Lbs.)
PS-0608SKP 3/16 100 1-1/4 " anchors / 100 #8 screws 3/8 - 3/4 1/ 1.0 10/ 11
PS-1012SKP 9/32 50 1-7/16" anchors / 50 #12 screws 1/2 - 1 1/ 1.2 10/ 12

 

PERFORMANCE TABLE

Poly-Set Kits
 Average Ultimate Tension load in Various Base Materials
PART
NUMBER		 DRYWALL (1/2") CONCRETE
(2000 PSI)		 CONCRETE
(4000 PSI)		 HOLLOW BLOCK (CMU)
PS-0608SKP 110 LBS. 225 LBS. 265 LBS. 235 LBS.
PS-1012SKP 145 LBS. 355 LBS. 390 LBS. 385 LBS.

Allowable load values are based upon a 4 to 1 safety factor. Divide by 4 for allowable load values.

INSTALLATION STEPS
For Solid Concrete For Hollow Material
poly01d.jpg (2208 bytes) 1. Drill hole at least 1/4" deeper than anchor length and insert anchor until flange is flush. poly01g.jpg (1809 bytes) 1. Drill hole and insert anchor until flange is flush.
poly01e.jpg (1930 bytes) 2. Fasten fixture by inserting sheet metal screw through fixture and into anchor. poly01h.jpg (1907 bytes) 2. Fasten fixture by inserting sheet metal screw through fixture and into anchor.
poly01f.jpg (2238 bytes) 3. Tighten screw. poly01i.jpg (1813 bytes) 3. Expand anchor after screw head is against fixture, tighten screw the number of additional turns indicated on the chart below.
Approximate number of additional turns after screw head is against fixture for indicated thickness of hollow wall.
DRYWALL THICKNESS PS-0608S PS-1012S
3/8" 7 - 9 Turns - - - - - - -
1/2" 5 - 7 Turns 8 - 9 Turns
5/8" 3 - 4 Turns 6 - 7 Turns
3/4" 1 - 2 Turns 4 - 5 Turns
Poly-Set Plug Anchor
Approvals and Listing

 

 
ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370
copyright © 2009 Illinois Tool Works, Inc.