ITW Red Head E-Z Ancor

QuickMenu Save Document

E-Z Ancor Self Drilling Drywall Anchor
Installation Instructions : Selection and Order Information : Performance Data
Product Information : Suggested Specifications : Approvals and Listing

INSTALLATION STEPS

1. Place #2 phillips screwdriver or cordless screwdriver (#2phillips bit) into recess of E-Z Ancor.

2. Press into Gypsum wallboard while turning the anchor clockwise until seated flush.

3. Place fixture in position over installed E-Z Ancor. Insert screw (#8A or AB screws are recommended). Tighten fixture into place.

SELECTION CHART

*E-Z Ancor*	Not for overhead
CATALOG NUMBER	DESCRIPTION	QTY/WT PER BOX Lbs.	QTY/WT PER MASTER CARTON Lbs.
EZ100	Zinc E-Z Ancor	100/ 1.6	1000/ 17
EZP100	Plastic E-Z Ancor	100/ 0.1	1000/ 4.2
EZ25	25 Zinc Anchors / 25 screws (#8—1-1/4" sheet metal screw)	1/ 0.9	10/ 10

PERFORMANCE TABLE

*E-Z Ancor*
MAXIMUM FIXTURE THICKNESS	ULTIMATE PULLOUT LBS. GYPSUM BOARD THICKNESS			ULTIMATE SHEAR LBS. GYPSUM BOARD THICKNESS
	3/8"	1/2"	5/8"	3/8"	1/2"	5/8"
3/4"	40	50	75	135	150	200
Divide by 4 for allowable load value.

E-Z Ancor Self Drilling Drywall Anchor
Installation Instructions : Selection and Order Information : Performance Data
Product Information : Suggested Specifications : Approvals and Listing