header

or go to the Advance Search
QuickMenu Save Document
Dynabolt Sleeve Anchor

Product Information
Suggested/Ordering Information
Performance Data
Approval Listings

dynabolt_prod1b.jpg (13092 bytes)

INSTALLATION INSTRUCTIONS

dynabolt_prod2e.jpg (6284 bytes)

 1. Use a bit with a diameter equal to the anchor. See selection chart to determine proper size bit for anchor used. Drill hole to any depth exceeding minimum embedment. Clean hole.
epcon_a7prod2f.jpg (3349 bytes) 2. Insert assembled anchor into hole, so that washer or head is flush with materials to be fastened.
dynabolt_prod2g.jpg (6076 bytes) 3. Expand anchor by tightening nut or head 2 to 3 turns.
 

 

 

 
ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370
copyright © 2009 Illinois Tool Works, Inc.