| NOTE: To achieve maximum loads the installation
process needs to be carried out as follows: |
| 1. |
Using the fixture
as a template, drill the correct diameter and depth hole. |
| 2. |
Remove debris with vacuum or
hand pump. |
| 3. |
Insert the assembled Boa Coil
anchor. (The coil anchor tab points up the anchor.)
Tap anchor down to depth set mark and stop. |
| 4. |
Tighten until washer is firmly
held to the fixture and stop. Number of turns to set anchor: 1/2" 3-4
turns, 5/8" and 3/4" 4-5 turns. Ensure washer is tight and
snug fit. |
| 5. |
The Boa Coil anchor is ready
to take load. (The bolt can be removed leaving the coil in the hole.
To re-insert follow steps 3 and 4.) |
The Boa coil anchor
can be reused up to 4 times.
Download PDF of Installation Instructions |
