|
Easy to Use —
A7 Saves
You Time
and Money
|
Fast
Dispensing, Fast Curing Acrylic Adhesive
The acrylic resin and hardening agent are completely mixed as they
are simultaneously dispensed from the dual cartridge through a static
mixing nozzle, directly into the anchor hole. A7 can be used with
threaded rod or rebar. |
|
| How
Can An Adhesive Anchor Save You Money? |
 |
Incredibly fast dispensing and rod installation times. |
|
Significantly faster
curing times. |
|
Easy to use (no-heating)
even at freezing cold temperatures. |
|
Requires less adhesive |
| |
|
| ADVANTAGES |
All
weather formula
No drip, no sag, easy
clean up
Fast and easy dispensing,even
28-oz. cartridge can be hand dispensed
Fast curing time, 35 minutes
at 60°F
Not mix ratio sensitive
for maximum consistency
Rods are easier to insert
into the hole with A7 compared with other adhesives
Works in damp holes and
underwater applications
Requires less adhesive
— can be used in 1/16" oversized or 1/8" oversized
holes
One formula for
both hollow and solid base materials
NSF 61 approved |
|
BASE MATERIAL
(F°/C°) |
WORKING TIME |
FULL CURE TIME |
100°/38° |
5 minutes |
25 minutes |
80°/27° |
5.5 minutes |
30 minutes |
60°/16° |
7 minutes |
35 minutes |
40°/4° |
15 minutes |
75 minutes |
20°/-7° |
35 minutes |
6 hours |
0°/-18° |
4 hours |
24 hours |
|
| |
|
